The Belt Conditioner

The entire snow conveyor system as well as the conditioner are made of stainless steel. The conditioner has a horizontal auger which together with the conveyor belt directly mounted to it, funnels the entire snow load into the snow tank. A brushless 3.5 kW AC motor powers this system. A controller in the driver’s cab for adjusting the speed of the conveyor drive for different requirements is possible upon request.

The cutter bar – and thus the blade – always have, independent of the blade depth, the optimum cutting angle to the ice guided by a special parallel arm system. No other adjustments are required when replacing a worn blade with a new one.

The blade can be adjusted in depth from the driver’s seat from the left and right separately. This is useful for shaving accumulated ice both in curves and on the edges.

The conditioners are available in the widths 2000 mm and 2200 mm.

In addition, the machine can be equipped with the following extras:

  • Driver’s cabin
  • Camera
  • Automatic Edger
  • Water sprayer
  • Fluting harrow
  • special painting

Driver’s cabin

The cabin is made of anodised aluminium profiles.
All windows are made of tempered safety glass.
Blank sections are filled with machine-coloured, painted aluminium plates.
Front and rear wipers and integrated cab heating are standard.


In confined spaces or passages used by the public, it is useful to monitor any blind spots with cameras.
Keep track of things optimally with up to four cameras.

Automatic Edger

With the edger mounted on the conditioner, you can resurface your ice right up to the edges while driving.
Hydraulic positioning ensures simple and comfortable operation from the driver’s cab.
The edger is accurately guided on the edges with the spring-loaded swivel system.

Water sprayer

With the water sprayer, a water volume of 350 litres per minute can be sprayed.
A spray width of up to 10 metres is possible with the adjustable lance.
With the added use of the snow tank, up to 2200 litres of water can be laid down per tank filling.

Fluting harrow

For curling a constant roughened ice surface is made by the fluting harrow over the whole conditioner width.
The fluting harrow is simply mounted on the conditioner and immediately ready for use.
The distance between the blades is 10 mm and the groove depth is continuously adjustable.

Standard painting

Our standard paintings:

Special painting

Practically any colour variation is possible upon request.

Here a few examples:

Icebear electric GmbH
Frida-Schröer-Str. 37
D-49076 Osnabrück